Ridge and eave tiles

Коньковая и карнизная черепица RUFLEX

Specially designed for maximum protection of roofing eaves and ridges, RUFLEX ridge and eaves course shingles:

  • provide maximum roofing protection against moisture and wind;
  • withstand substantial icing loads;
  • provide 100% leaktightness due to a continuous adhesive layer;
  • allow the eaves edge to be made fine and even, thus improving the roofing appearance;
  • are dual-purpose: one shingle package covers both eave and ridge. 

 

Specification

Installation method: fastening with roofing nails, attaching the self-adhesive layer.

  • Shingle size: 1 m х 0.33 m
  • Package weight: 30 kg ± 1.5 kg
  • Covering area: 21 rm of eaves or 17 rm of ridge
  • Base: glass-fiber mat
  • Asphalt type: elastomeric asphalt
  • Upper layer: colored stone granules
  • Lower layer: sand, self-adhesive strip
  • One package is intended to shingle 21 rm of eaves and 17 rm of ridge.

Advantages of RUFLEX ridge and eave shingles  

  • Higher ridge shingling rate (wide ridge of 333 mm versus the Finnish equivalent 250 mm wide).
  • Better eave waterproofing (wide ridge of 333 mm versus the Finnish equivalent 250 mm wide). 

Use conditions

Ridges, eaves and valleys are roofing elements exposed to maximum loading. It is these elements that carry the basic wind and precipitation loads. Eave elements also have to withstand loads of ice dams building up on eaves in winter. So only RUFLEX ridge and eave shingles  specially designed for the purpose can provide maximum protection. 

Shingles are dual-purpose and can be used both for the ridge and eave. Where employed for the eave, a whole shingle sheet is used. In the case of ridge shingling, each sheet is cut into three pieces along the perforation.  Shingles installed on the ridge have overlapping edges (5-7 cm). Accordingly, one package is intended to shingle 17 running meters of the ridge or 21 running meters of the eaves.

BRISS collection

    Amber      Frosty Chestnut 
Fiery Cinnamon
Copper
                 

                 

Коллекция ORNAMI

Sand Beach
Double Cognac
Red Clay
Coffee
                 
                 

SOTA collection

Red
Gooseberry
Green
Basil
Dark
Chocolate
Dark Blue
Heather


Lichen
Dune
Hoarfrost 
Golden Sand
             
                                     

TAB collection

   Red fox
Caramel Malt
Green Tea

Norwegian Fiord 

Curry
 

 
 
               
 
 
 

 
 
Cedar Nut
Nougat with Almond
Bronze
Dark Blue
Golden Sand
               
               

RUNA collection

Granite
Taiga
Baltic
Ripe Chestnut  
Terracotta
 
 

Shimmering
       Copper

Golden Sand
Dune
Blue Lagoon
               
               

 

RUFLEX RIDGE shingles   

RUFLEX RIDGE 3-tab shingles combine flexibility, reliability and fine appearance. Each shingle measuring 305 mm x 914 mm is divided into three tabs (305 mm x 305 mm).

RUFLEX RIDGE shingles are designed for use as a component material for shingles produced by Certain Teed. Use the color of RUFLEX RIDGE shingles that mixes well with that of course roof covering.

RUFLEX RIDGE double-layer ridge shingles are the perfect final touch for your RUFLEX Esten roofing, providing additional protection. 

 

RUFLEX RIDGE is primarily:

  • double-layer protection for the most “difficult” roofing areas – ridges and eaves;
  • aesthetic design of your roofing. Use is often made of course shingles scored for bending instead of ridge shingles. It looks careless and fails to provide reliable protection.  

RUFLEX RIDGE is part of the RUFLEX Esten roofing system. Offering a range of advantages, these ridge shingles will the best choice for those wishing to have the perfect roofing overhead. 

RUFLEX RIDGE advantages for house owners and professional roofers:

  • High quality – RUFLEX RIDGE double-layer ridge shingles are manufactured by Certain Teed (U.S.A.), the world’s largest shingle manufacturer leading the world market since 1900.
  • Written warranty – 35 years for the entire roof covering of RUFLEX double-layer shingles.
  • Water impermeability.
  • Increased area of the self-adhesive layer on the reverse side makes it unnecessary to additionally apply asphalt cement.
  • Labor saving – the size of a ridge shingle sheet plus special perforation allows the installation time to be reduced manyfold (no need to cut ridge elements in advance).
  • Special durability – laminated ridge shingle sheets are twice as thick as those of an ordinary single-layer ridge shingles by other manufacturers.
  • Color scheme – specially developed colors matching the color pallet of course shingles will create an excellent roofing design.

Specification

  • Base: high strength glass-fiber mat preventing asphalt fissuring
  • Shingle sheet size: 305 mm x 914 mm
  • Tab size: 305 mm x 305 mm
  • Open tab edge length: 127 mm
  • Covering (package): 9.14 running meters

Installation

RUFLEX RIDGE shingles requires no maintenance, provided that installation is performed according to the manufacturer’s instructions. Any roof, nevertheless, should be inspected at least annually to ensure roofing protection. Old roofs should be inspected at shorter intervals.

Detailed installation guidelines, including illustrations, are included with each shingle package.

Made in the U.S.A.  

We are in: